The Wind250 is a candidate for a 7–8 m bus or coach project when an engine-driven rooftop system matches the vehicle architecture. Bus length is an initial filter: roof space, compressor mounting and route conditions still need to be checked before an order is confirmed.
Include the bus model, roof drawing and available installation space, engine and compressor-drive information, passenger capacity, operating climate and door-opening pattern. For replacement projects, add the existing unit and compressor model numbers and photographs of the mounting points.
The published Wind series sheet lists a Valeo TM31 compressor, four evaporator blowers and three condenser fans for Wind250. Confirm the actual supplied configuration and connection details in the quotation. Optional heating should be specified separately.
Download the Wind series technical sheet, or request a Wind250 configuration review. Provide the intended duty cycle so selection can be checked beyond the nominal capacity figure.
| Model | Wind250 | |
| Cooling Capacity | 85500BTU / 25KW / 21500Kcal/h | |
| Heating Capacity | Optional | |
| Fresh Air | 1000 m3/h | |
| Refrigerant | R134a | |
| Compressor | Model | VALEO TM31 |
| Displacement | 313 cc | |
| Weight | 15.5 Kg with clutch | |
| Oil Type | ZXL 100PAG | |
| Evaporator | Type | Hydrophilic aluminum foil with internal ridge copper tube |
| Air Flow | 4,000 m3/h | |
| Blower Type | 4-speed centrifugal type | |
| No. of Blower | 4 pcs | |
| Current | 32A | |
| Condenser | Type | Micro-channel heat exchanger |
| Air Flow | 5,700 m3/h | |
| Fan Type | Axial type | |
| No. of Fan | 3 pcs | |
| Current | 24A | |
| Total Current | < 65A | |
| Weight | 138KG | |
| Dimension (L*W*H) mm | 2481*1820*220 | |
| Application | 7-8 Meter City Bus & Coach | |
.png)
